Elegoo Uno R3 ATmega328P ATmega16U2 Board (ELCB001)
The Uno now uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
Control using Atmel ATmega328P chip
100% compatible with the official version.
It use the same ATmega328 as official R3 board. The ATmega328 on the R3 comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.
The ATmega328 has 32 KB (with 0.5 KB occupied by the bootloader). It also has 2 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM library).
The RX and TX LEDs on the board will flash when data is being transmitted via the USB-to-serial chip and USB connection to the computer.
The ELEGOO R3 puts SDA and SCL pins beside the AREF. Besides, there are two new pins placed near the RESET pin. One is the IOREF that allows the shields to adapt to the voltage provided from the board and the other one is reserved for future purposes. The ELEGOO R3 works with all existing shields and can adapt to new shields which use these additional pins.
Features
* ATmega328P microcontroller
* Input voltage - 7-12V
* 5V Electric current: 500MA
* 3.3V Electric current: 50MA
* 14 Digital I/O Pins (6 PWM outputs)
* 8 Analog Inputs
* 32k Flash Memory
* 16Mhz Clock Speed
Component listing:
1pcs ELEGOO R3 Development Board
1 pcs USB cable
| Βάρος (κιλά) | 0.150000 |
|---|---|
| Κατάσταση | Καινούριο |
| Brand | Elegoo |
| Μοντέλο | EL-CB-001 |
| Χρώμα | Μαύρο |
| Εγγύηση | 12 μήνες |