Hilitand 0 °C - 400 °C alarm digital intelligent thermostat LED PID temperature controller kits AC110 V-240 V (REX-C100)

REX-C100 Temperature Controller Kit
Condition: high quality.
Measuring accuracy: ± 0.5% FS.
Cold-end compensation tolerance: ± 2℃ (can be changed to 0~50℃ by software)
Resolution: 14 bit
Sample cycle: 0.5 sec.
Power supply: AC 100-240 V.
Process value (PV), setting value (SV)
Output and self-optimisation can be displayed by: LED.
PIN control (including ON/OFF, step PID and continuous PID)
Self-optimisation.
Relay output: contact capacity 250 V AC 3 A (resistive load).
Output contact capacity: 250 V AC 3 A (resistive load).
Setting value (SV): identical to the measuring range (PV).
Proportional range (P): 0 ~ full range (ON/OFF control when setting to 0)
Integral Time (I): 0 ~ 3600 sec. (No integral action at 0)
Derivative time (D): 0 ~ 3600 seconds (no dissipation at 0)
Heat reset proportional cycle: 1~100s
Detector temperature range: 0 to 400 ℃
Insulation resistance: > 500 M Ohm (500 V DC).
Insulation resistance: 1500 V AC/min.
Power consumption: 10 VA.
Service environment: 0 ~ 50 ℃.
Environment without corrosive gas 30 ~ 85% RH.
K Thermocouple Probe Cable
Length: 1 m.
Sensor diameter: 4.5 mm.
Temperature ring: 0-400℃
Internal insulation: fibreglass
External shielding: insulated shielding
Max.40A SSR
Output Voltage Range: Standard Type
Output current: 40 A.
Input voltage: DC 3-32 V.
Output voltage: 24-380 VAC.

Package includes:
1 x PID Temperature Controller
1 x K-type sensor
1 x max. 40A SSR